A Premium Guide to Seal Coating

Sealcoating have been an indispensable part of asphalt pavement maintenance processes since long, it is imperative to recognize that sealcoatings are engineered products that must be used with a thorough understanding of their performance properties which, in turn, are accomplished through proper steps encompassing project planning, execution and management of sealcoating projects.
Before you look for asphalt paving in Abington, these are the crucial things you need to know.

Components of sealcoating:

In appearance sealcoatings look like thick semi-fluid in dark-chocolate brown with water-based coatings. They are essentially fine dispersions of binders that include commonly refined tar, specialty resins, and asphalt, clays, fillers, and specialty chemicals in a medium of water. The four major components in sealcoatings are:

a)    Binder: The backbone of sealcoating compositions, binder is the one that is responsible for imparting protection, preservation and beauty, while bonding tenaciously to the asphalt pavement.

b)    Clay and fillers: These impart tensile strength, hardness and resistance to abrasion. It’s vital to maintain the proper balance between the toughness and flexibility of the sealcoating for its proper functioning.

c)    Water: The dispersion medium which offers the ease in handling, application and storage and where all the ingredients stay stably dispersed.

d)    Specialty chemicals: Specific functions like water repellency, flexibility, specific resistance to salts and petrochemicals are performed by these chemicals while maintaining the physical stability of the sealcoating.

Steps of sealcoating process, as practiced by the professional contractors:

• If required, they patch or seal cracks to prepare the road surface prior to sealing.

• A mixture of asphalt combined with water is then sprayed on the road surface. The water in this mixture starts to evaporate immediately.

• Immediately after spraying the asphalt-water mixture, a layer of gravel is spread over the surface.

• Next, the gravel is compacted and embedded into the asphalt with rollers. In some cases, sand is applied to assist in the consolidation and curing process. Despite the high-pressure rollers, some gravel will not become embedded in the asphalt.

• The surface is allowed to cure for up to two days while the water continues to evaporate.  Hot, dry summer days help speed this process. Traffic can pass over this surface at reduced speeds during the curing process.

• Finally, the sealcoated surface is swept to eliminate any loose gravel.

Sealcoating in Taunton or Abington or anywhere in Massachusetts is provided by Heap Paving & Sealcoating by the expert contractors. Contact them on http://www.heappaving.com or at (508) 456-6363 for a free estimate.

6 Cool Budget Control Ideas for Driveways

Are you building a new home, or constructing fresh driveways in Mansfield for your house? Or are you maintaining a driveway that you already have? In either of the cases, when it comes to take care of the driveway, the budget often gets beyond the limit aimed at.

Here are some smart options to choose from if you are looking for a proper care of your driveways without spending much.

a)    Weed-Free Brick Driveway

If you have a shorter driveway, choosing paving bricks might be an option. However, the problem with bricking a driveway is that weeds tend to grow in between the bricks. There are artificial sand-like materials that get glued together and don’t allow weeds to infiltrate. If you are searching for a finished and manicured look for your home, a brick driveway could help you accomplish it.

b)    Recycled products and materials

This is for a very tight budget. Use recycled grated asphalt materials to form a base of the driveway and to prevent the path being muddy.

c)    Tar, chip and pavers driveways

Tar and chip provide durability and a classic look simultaneously. They add to the look by lining the driveway in pavers. This would add to the cost of the finished driveway but at the same time would be a visual delight.

d)    Stone at the edges

Loose materials cost for driveways cost less and are more affordable as well. However, it might not be tasteful for many for the way they look. A more finished look can be achieved with loose materials if you line-it up with a type of edging. It has a way of dressing everything up.

e)    Fancy concrete driveway

Concrete driveways are common in most suburban homes. But they can all begin to look the same after a while. If you want to make your home stand out, consider putting a design in the midst of the concrete driveway to put up as a gorgeous option.

f)    Driveway made of cobblestone

If you are looking for new driveways in Plymouth, chances are high to expect rain and chilly winters. Hence, creating the cobblestone driveway not only gives you the desired look, but it also makes it more durable.

If you are interested in any of the construction patterns of driveways in Mansfield, you may contact Heap Paving & Sealing on http://www.heappaving.com/ or at (508)456-6363 for an estimate.